2x2, the next step
The Ortega method for the 2x2
Ortega is the method most fast 2x2 solvers start with. It has three steps, like the beginner method, but each one does more: a white face, then the yellow face, then both layers at once.
You learn twelve short algorithms: seven for the top and five for the last step. Every case below has a picture and a 3D cube that plays it, and every step has a practice cube.
- 3 steps
- 12 algorithms
- A week or two of practice
- After the beginner method
Before you start
If you are new to the 2x2, learn the beginner method first. Ortega uses its trigger, and it helps to know how the pieces move.
Two new bits of notation: F turns the front face, and a 2 after a letter means a half turn, so R2 is the right face turned twice.
How to hold the cube
Keep white on the bottom and yellow on top, as in the beginner course. The only exception is in step 3, where some cases ask you to turn the whole cube over.
Step 1: A white face
Make the bottom all white. Unlike in the beginner method, the colours on the sides do not have to match: any four white corners will do, in any order.
That makes this step much quicker, and you can do most of it by eye. Put white corners next to each other on the bottom, and drop the last one in with the trigger you already know.
How to do it
- Find two white corners and put them next to each other on the bottom, white facing down. A turn or two is usually enough.
- Add a third white corner next to them in the same way.
- Turn the bottom (D) until the empty spot is at the front on the right. Then turn the top (U) until a white corner sits right above it.
- Do R U R' U' until that corner drops in with white facing down: one, three or five times.
Watch it
Tip
Fast solvers plan the whole white face before the first move. Try it: before you turn anything, look for white corners that already sit side by side.
Your turn
Make a white face. The sides can be any colours.
Moves: 0
Drag the cube to look at it from any side, the bottom too. Keys: R U F L D B turn a face, add Shift for the other way. Y turns the whole cube.
Step 2: The yellow face (OLL)
Now make the whole top yellow in one go. The top can look seven different ways, and each one has its own algorithm. The white face stays as it is.
To find your case, count the yellow stickers on top. One means Sune or Antisune, none means H or Pi, and two means U, T or L. Then turn the top until it looks like the picture.
How to do it
- Count the yellow stickers on top.
- Find the picture with the same pattern of yellow, on top and on the sides.
- Turn the top (U) until your cube looks exactly like the picture. The bottom edge of the picture is the side facing you.
- Do the algorithm. The whole top turns yellow.
The cases
Tap a case to see it on the 3D cube, then press Play.
Tip
Learn Sune and Antisune first, then add one new case a day. Saying the name out loud when you spot a case helps it stick.
Your turn
The white face is done. Make the top yellow.
Moves: 0
Drag the cube to look at it from any side, the bottom too. Keys: R U F L D B turn a face, add Shift for the other way. Y turns the whole cube.
Step 3: Both layers at once (PBL)
Last step: both faces are done, and now the pieces swap places so the sides match. Look at the sides of each layer, first the top, then the bottom.
A layer is adjacent when one side shows two stickers of the same colour: these are called headlights. It is diagonal when no side has a pair. If every side has a pair, that layer is done, even if it still needs turning.
How to do it
- Look at the top layer and the bottom layer. Each one is done, adjacent or diagonal.
- If only the bottom is wrong, or the top is diagonal and the bottom adjacent, turn the whole cube over, keeping the front facing you. This is z2: now the top and the bottom have swapped.
- Turn the top, and the bottom if the picture needs it, until the headlights are where the picture has them. Then do the algorithm.
- Turn the top and the bottom until every side matches. Solved.
The cases
Tap a case to see it on the 3D cube, then press Play.
Tip
R2 F2 R2 is the shortest algorithm in the whole course: three half turns. Most of the time in this step goes into spotting the headlights, so practise looking at both layers before you turn.
Your turn
Both faces are done. Solve the cube.
Moves: 0
Drag the cube to look at it from any side, the bottom too. Keys: R U F L D B turn a face, add Shift for the other way. Y turns the whole cube, Z turns it over.
Solved. What next?
That is the whole of Ortega: a white face, the yellow face, then both layers. Practise the cases until you know them without looking, then speed up the first step by planning it before you turn.
After Ortega, fast solvers move on to CLL, which solves the top in one step, and later EG. Both build on what you learned here.
Questions
What is the Ortega method?
A 2x2 method in three steps: a face, the opposite face (OLL), then both layers at once (PBL). It is named after Victor Ortega, who made it popular.
Should I learn the beginner method first?
Yes, if you are new to the 2x2. The beginner course teaches the trigger and how the pieces move, and then Ortega's first step comes easily.
How many algorithms is it?
Twelve: seven for the top and five for the last step. Some guides list more cases for the last step, but those are cases you already know upside down, so here you turn the cube over instead.
Can I use a smart 2x2?
Not yet. For now we support smart 3x3 cubes. Until then, practise on the screen and on your own cube.
- 2x2 timer: random 2x2 scrambles, like at competitions.
- 2x2 beginner course: the three steps that come before Ortega.
- Cube notation: every letter and symbol explained.