From zero

How to solve a 2x2 cube

The 2x2 is the friendliest puzzle to start with: eight pieces, no centres and only three algorithms. Most people solve it for the first time on the same evening.

Every step below has a 3D cube that shows the moves and a practice cube where only that step is left to do. Try it on the screen, then on your own cube.

  • 3 steps
  • 3 short algorithms
  • One evening
  • No 3x3 needed

Before you start

A 2x2 has only corners: eight of them, each with three colours. There are no centres, so no face has a fixed colour. You decide where white goes, and the other pieces follow.

The colours sit in pairs on opposite sides: white opposite yellow, red opposite orange, green opposite blue. Each corner belongs exactly where its three colours meet.

Moves are written as letters: R turns the right face, U the top, L the left, D the bottom, F the front and B the back. A letter on its own is a quarter turn clockwise, as you look straight at that face. R' (say "R prime") is the same turn the other way.

Read the full guide to cube notation

How to hold the cube

From step 1 to the very end, keep white on the bottom and yellow on top. You can turn the cube left and right to look at it, but never turn it over.

Step 1: The white layer

Build the whole bottom layer: four white stickers underneath, and on every side the two bottom stickers in the same colour. A white face with mixed-up sides is not enough: the sides have to match as well.

Start with any white corner. It decides where the others go: each new corner goes next to the ones you already have, with the colours on its sides matching theirs. One short move does all the work: R U R' U', the trigger.

Trigger

How to do it

  1. Find a white corner in the top layer.
  2. Turn the top (U) until that corner sits right above its place: the empty spot in the bottom layer between the two colours it has on its sides.
  3. Turn the whole cube so that the corner is at the front on the right, in the top layer.
  4. Do R U R' U' until the corner drops in with white facing down. Then the next corner.

Watch it

White facing right: one trigger.
White facing the front: five triggers.
White facing up: three triggers.

Tip

If a white corner is stuck in the bottom layer in the wrong place, hold it at the front on the right, at the bottom, and do one trigger. It pops up to the top, and then you can put it in properly.

Your turn

Build the white layer. Every corner can still be anywhere.

Moves: 0

Drag the cube to look at it from any side, the bottom too. Keys: R U F L D B turn a face, add Shift for the other way. Y turns the whole cube.

Step 2: Yellow corners into place

Now the four top corners. In this step they only have to reach their places; which way they are twisted does not matter yet. A corner is in its place when its colours match the two sides under it, whether yellow is on top or not.

On a 2x2 the top turns freely, so first turn it until exactly one corner fits. Watch out: sometimes two corners fit at once. That is not it, keep turning the top.

Corner swap

How to do it

  1. Turn the top until exactly one corner is in its place. If all four are, this step is done.
  2. Turn the whole cube so that corner is at the front on the right, in the top layer. White stays at the bottom.
  3. Do U R U' L' U R' U' L. The corner at the front on the right stays put, and the other three swap round.
  4. Look again. Not there yet? Do it once more, holding the cube the same way. If no single corner fits however you turn the top, do the algorithm once from any side, and then one will.

Watch it

One corner in its place at the front on the right; the other three swap round.

Tip

Look at the colours on the sides, not at yellow. A corner can be in its place with yellow facing sideways, and for this step that is fine.

Your turn

The white layer is done. Get the four top corners into their places, twisted any way.

Moves: 0

Drag the cube to look at it from any side, the bottom too. Keys: R U F L D B turn a face, add Shift for the other way. Y turns the whole cube.

Step 3: Twisting the yellow corners

Last step: twist each top corner until yellow faces up. You do one corner at a time, always in the same spot: at the front on the right, in the top layer.

Halfway through this step the white layer will look wrecked. That is normal. Do not try to fix it: it rebuilds itself once every corner is done.

Corner twist

How to do it

  1. Hold the cube with a corner that needs twisting at the front on the right, in the top layer. From now on, do not turn the whole cube.
  2. Do R' D' R D until that corner shows yellow on top: two times or four times.
  3. Turn only the top (U) to bring the next corner that needs twisting to the front on the right, and do the same again.
  4. When the whole top is yellow, turn the top until the sides line up. Solved.

Watch it

Two corners twisted: two goes for the first one, four for the second.

Tip

Count out loud: R' D' R D is one go. Most mistakes in this step come from turning the whole cube halfway through instead of just the top.

Your turn

The corners are in their places. Twist them until the top is yellow, then line up the top.

Moves: 0

Drag the cube to look at it from any side, the bottom too. Keys: R U F L D B turn a face, add Shift for the other way. Y turns the whole cube.

Solved. What next?

That is the whole method: the white layer, then the top corners into their places, then twisted. Solve it a few more times without looking at this page and it will stay with you.

Once it has, time yourself. The timer gives you 2x2 scrambles just like at competitions, and your first solve under a minute feels great.

Time your 2x2 solves

Questions

Is the 2x2 hard?

No. It is the easiest cube to start with: three steps and three algorithms. Most people solve it for the first time in one evening.

How long does it take to learn?

One evening for your first solve, and a few more days until you can do it without looking at the page.

Do I need to know the 3x3 first?

No. This course starts from zero. And if you already know our 3x3 beginner method, you know all three algorithms already: they are the 3x3's corner steps.

What do R, U and R' mean?

They are the faces of the cube: R is right, U is up (the top), L left, D down (the bottom), F front, B back. A letter on its own is a quarter turn clockwise, with an apostrophe it goes the other way, and with a 2 it is a half turn.

Can I use a smart 2x2?

Not yet. For now we support smart 3x3 cubes. Until then, practise on the screen and on your own cube.

How do people solve it in a few seconds?

With other methods: Ortega, and later CLL or EG. They solve the cube in fewer steps but need more algorithms. Learn this method first: they build on it.